You see a screen like this:
3. Scroll down and select System Administration. Enter the administrator password, if necessary.
4. Select Network Settings > Advanced Setup > Email Server > Server Settings.
You see a screen like this:
5. Select one of the options shown above, then select the settings you want to use. Contact your
internet service provider, if necessary, to confirm the authentication method for the email server.
6. Select OK to save the settings and select Done to exit.
7. Select Connection Check to verify the connection to the email server.
Parent topic: Wi-Fi or Wired Networking
Related tasks
Scanning to Email
Forwarding Received Faxes
To Next Page
Loading...
