Epson WorkForce 435 User Manual

127
Store ink cartridges in a cool, dark place. If you bring them inside from out in the cold, allow them
to warm up to room temperature for at least 3 hours before using them.
Remove and Install Cartridges
Be sure you have your replacement cartridges handy before you begin. You must install new
cartridges immediately after removing the old ones.
Warning:
Keep ink cartridges out of the reach of children and do not drink the ink.
Caution:
Do not open ink cartridge packages until you are ready to install the ink. Cartridges are vacuum
packed to maintain reliability.
1. Turn on the product.
2. If an ink cartridge is low or expended, you see a message on the LCD screen indicating which
color to replace. Press OK.
If you’re replacing a cartridge before you see a message on the LCD screen, press Menu,
press or to select Maintenance, and press OK. Then select Ink Cartridge Replacement
and press OK.
3. Lift up the scanner unit.
4. Open the cartridge cover.
5. Squeeze the tab on the cartridge and lift it up. Dispose of it carefully. Do not take the used
cartridge apart or try to refill it.

Epson WorkForce 435 Specifications

Print Specifications

maximum print resolution	5760 x 1440 optimized dpi
black print speed	6.3 ISO ppm
color print speed	3.3 ISO ppm

Scan Specifications

optical resolution	2400 dpi
hardware resolution	1200 x 2400 dpi
maximum resolution	9600 x 9600 dpi interpolated

Fax Specifications

fax modem speed	33.6 Kbps
fax memory	up to 180 pages
speed dials	60 max

Operating Environment

operating temperature	50 ° to 95 °F (10 ° to 35 °C)
storage temperature	-4 ° to 104 °F (-20 ° to 40 °C)
operating relative humidity	20 – 80%

Power Specifications

rated voltage	AC 100 – 120 V / 220 – 240 V
rated frequency	50 – 60 Hz
rated current	0.6 Amp

Weight and Dimensions

printing dimensions	18.1" x 21.3" x 11.9"
storage dimensions	18.1" x 16.2" x 9.3"
weight	15.7 lb