EasyManua.ls Logo

Epson WorkForce 435 - Network Interface; Paper

Epson WorkForce 435
174 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
164
Color:
Fine: 200 × 200 dpi
Photo: 200 × 200 dpi
Error correction mode
CCITU/ITU Group 3 fax with error correction mode
Speed dial/group dial numbers
Up to 60 (combined)
Page memory
Up to 180 pages (ITU-T No. 1 chart)
Redial
2 times (with 1 minute interval)
Interface
RJ-11 Phone Line
RJ-11 Telephone set connection
Network Interface
Wireless LAN
Standard: IEEE 802.11b/g/n (IEEE 802.11b/g/n or b/g compliant, depending on purchase
location)
Security: WEP (64/128bit), WPA-PSK (TKIP/AES) WPA2 compliant
Frequency band: 2.4 GHz
Communication mode: Ad hoc mode, infrastructure mode
Paper
Use paper under normal conditions:
Temperature: 59 to 77 °F (15 to 25 °C)
Humidity: 40 to 60% RH
Note:
Since the quality of any particular brand or type of paper may be changed by the manufacturer at
any time, Epson cannot guarantee the quality of any non-Epson brand or type of paper. Always
test a sample of paper stock before purchasing large quantities or printing large jobs.
Single sheets
Size
A4 (8.3 × 11.7 inches [210 × 297 mm]))
A6 (4.1 × 5.8 inches [105 × 148 mm]))
Letter (8.5 × 11 inches [216 × 279 mm])
Legal (8.5 × 14 inches [216 × 357 mm])

Table of Contents

Other manuals for Epson WorkForce 435

Related product manuals