EasyManuals Logo

Epson WorkForce 545 Quick Guide

Epson WorkForce 545
44 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #30 background imageLoading...
Page #30 background image
30
Solving Problems
Make sure that the product is within range of your router or access point.Contact
your router manufacturer for details.
The product does not appear in the printer window
(Mac OS X)
Make sure the printer driver was installed correctly and that your computer’s TCP/IP
settings are configured correctly.
Make sure the product is connected to the same network as your Mac.
Cannot Print Over the Network
Print a Network Status Sheet (see page 31) and verify that the network settings are
correct and no errors are shown.
If your network does not assign IP addresses using DHCP, you need to set the IP
address manually.
For an Ethernet connection, make sure that the product is turned on, and that your
router, access point, switch, or hub link LED for the port the product is connected to
is on or flashing. If the link LED is off, try the following:
Make sure the Ethernet cable is securely connected to both the product and your
router, access point, switch, or hub.
Try connecting to another port on your router, access point, switch, or hub.
Try connecting the product to another router, access point, switch or hub.
Try connecting the product to your router, access point, switch, or hub with
another Ethernet cable.
Try printing from another computer on the network to see if the problem
persists.
The Product’s WiFi Light Is On but You Can’t Print
Your router might not be assigning IP addresses automatically using DHCP. If it
isnt, you will need to set the products IP address manually. Make sure it is set
correctly for your network. Contact your router manufacturer for assistance.
Make sure your firewall or security software is not set to block port 3629 (TCP/
UDP). Contact your firewall manufacturer for assistance.

Other manuals for Epson WorkForce 545

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Epson WorkForce 545 and is the answer not in the manual?

Epson WorkForce 545 Specifications

Print Specifications IconPrint Specifications
maximum print resolution5760 x 1440 optimized dpi
ISO print speed black15 ISO ppm
ISO print speed color7.2 ISO ppm
Copy Specifications IconCopy Specifications
maximum copy size8.5" x 14"
ISO copy speed black12 ISO cpm
ISO copy speed color5.5 ISO cpm
Scan Specifications IconScan Specifications
optical resolution2400 dpi
hardware resolution2400 x 2400 dpi
maximum resolution9600 x 9600 dpi
Fax Specifications IconFax Specifications
modem speed33.6 Kbps
fax memoryup to 180 pages
speed dials60 (max.)
Power Specifications IconPower Specifications
rated voltage100 – 120 VAC
rated frequency50 – 60 Hz
rated current0.6 Amp
Operating Environment IconOperating Environment
operating temperature50 ° to 95 °F (10 ° to 35 °C)
storage temperature-4 ° to 104 °F (-20 ° to 40 °C)
operating relative humidity20 – 80%
Weight and Dimensions IconWeight and Dimensions
printing dimensions (W x D x H)17.6" x 21.9" x 9.4"
storage dimensions (W x D x H)17.6" x 14.2" x 8.9"
weight17.6 lb

Related product manuals