EasyManuals Logo

Epson WorkForce 545 Quick Guide

Epson WorkForce 545
44 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #31 background imageLoading...
Page #31 background image
Solving Problems
31
Printing Is Slow or the Print is Cut Off
Print a Network Status Sheet (see below) and check the signal strength. If it’s poor, try
moving the product closer to your wireless router or access point. Avoid placing the
product next to a microwave oven, 2.4 GHz cordless phone, or large metal objects such as
a filing cabinet.
Cannot Scan Over the Network
Epson Scan is not available in Mac OS X 10.6; see page 23 for scanning instructions.
If you cannot scan from the products control panel, make sure you restarted your
computer after installing the product software. Make sure Epson Event Manager is
not being blocked by your firewall or security software.
If you are scanning a large document at high resolution, a communication error may
occur. If the scan did not complete, lower the resolution.
If network communication was interrupted while starting Epson Scan, exit Epson
Scan, and restart it after a few seconds. If Epson Scan cannot restart, turn the product
off and on, and then try again. Check the
Timeout Setting
in
EPSON Scan
Settings
. For details, see the Epson Scan Help.
Print a Network Status Sheet
1. Press F Setup.
2. Press u or d to select
Network Settings
, then press
OK
.
3. Press u or d to select
Confirm Network Settings
, then press
OK
.
4. Press the
B&W
or
Color
x
Start
button to print a network status sheet.
Printing and Copying Problems
Make sure the size of paper you loaded matches the paper size selected on the control
panel or in your printer software.
Letter-size paper is automatically selected for copying. If your legal-size document is
cropped, press
Reduce/Enlarge
and select
Legal->Letter
.
Position your original against the back left corner of the scanner glass. If the edges are
cropped, move your original away from the edges slightly. Place the document flat
against the scanner glass.
Printing stops when an ink cartridge is expended. If a color cartridge is expended, you
may be able to continue printing temporarily with black ink; see the online User’s
Guide for more information. If the black cartridge is expended, you must replace it to
continue printing.

Other manuals for Epson WorkForce 545

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Epson WorkForce 545 and is the answer not in the manual?

Epson WorkForce 545 Specifications

Print Specifications IconPrint Specifications
maximum print resolution5760 x 1440 optimized dpi
ISO print speed black15 ISO ppm
ISO print speed color7.2 ISO ppm
Copy Specifications IconCopy Specifications
maximum copy size8.5" x 14"
ISO copy speed black12 ISO cpm
ISO copy speed color5.5 ISO cpm
Scan Specifications IconScan Specifications
optical resolution2400 dpi
hardware resolution2400 x 2400 dpi
maximum resolution9600 x 9600 dpi
Fax Specifications IconFax Specifications
modem speed33.6 Kbps
fax memoryup to 180 pages
speed dials60 (max.)
Power Specifications IconPower Specifications
rated voltage100 – 120 VAC
rated frequency50 – 60 Hz
rated current0.6 Amp
Operating Environment IconOperating Environment
operating temperature50 ° to 95 °F (10 ° to 35 °C)
storage temperature-4 ° to 104 °F (-20 ° to 40 °C)
operating relative humidity20 – 80%
Weight and Dimensions IconWeight and Dimensions
printing dimensions (W x D x H)17.6" x 21.9" x 9.4"
storage dimensions (W x D x H)17.6" x 14.2" x 8.9"
weight17.6 lb

Related product manuals