EasyManua.ls Logo

Epson WorkForce WF-3010DW - For Windows; For Mac os X; Cleaning the Product; Cleaning the Exterior of the Product

Epson WorkForce WF-3010DW
103 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
For Windows
A
Access the printer settings.
& “Accessing the printer driver for Windows” on page 26
B
Click the Maintenance tab, and then click the Printer and Option Information button.
C
Select Off, 30 minutes, 1 hour, 2 hours, 4 hours, 8 hours, or 12 hours as the Power Off Timer setting.
D
Select 3 minutes, 5 minutes, or 10 minutes as the Sleep Timer setting.
E
Click the OK button.
For Mac OS X
A
Access the Epson Printer Utility 4.
& “Accessing the printer driver for Mac OS X” on page 27
B
Click the Printer Settings button. The Printer Settings screen appears.
C
Select Off, 30 minutes, 1 hour, 2 hours, 4 hours, 8 hours, or 12 hours as the Power Off Timer setting.
D
Select 3 minutes, 5 minutes, or 10 minutes as the Sleep Timer setting.
E
Click the Apply button.
Cleaning the Product
Cleaning the exterior of the product
To keep your product operating at its best, clean it thoroughly several times a year by using the following instructions.
c
Important:
Never use alcohol or thinner to clean the product. These chemicals can damage the product.
Note:
Close the rear paper feed slot and the output tray when you are not using the product to protect the product from dust.
User’s Guide
Maintaining Your Product and Software
57

Table of Contents

Other manuals for Epson WorkForce WF-3010DW

Related product manuals