F
Put the used maintenance box in the plastic bag provided with the replacement box, and dispose of it properly.
Note:
Do not tilt the used maintenance box until after it is sealed in the plastic bag.
G
Insert the maintenance box into place as far as it will go.
H
Reattach the rear cover.
I
Press the P button to turn the product back on.
Maintenance box replacement is complete.
Transporting the Product
If you move the product some distance, you need to prepare it for transportation in its original box or one of a similar
size.
c
Important:
❏ When storing or transporting the product, avoid tilting it, placing it vertically, or turning it upside down;
otherwise ink may leak.
❏ Leave the ink cartridges installed. Removing the cartridges can dry out the print head and may prevent the product
from printing.
User’s Guide
Maintaining Your Product and Software
60
To Next Page
Loading...
