EasyManua.ls Logo

Epson WorkForce WF-3010DW - Network Interface Specification; Mechanical; Electrical

Epson WorkForce WF-3010DW
103 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Network interface specification
Wi-Fi Standard:
IEEE 802.11b/g/n
*1
Security: WEP (64/128bit)
WPA-PSK (TKIP/AES)
*2
Frequency Band: 2.4 GHz
Communication Mode: Infrastructure mode
Ad hoc mode
Ethernet Standard:
IEEE802.3i/u, IEEE802.3az
*3
Communication Mode: Ethernet 100BASE-TX/10BASE-T
*1 Complies with either IEEE 802.11b/g/n or IEEE 802.11b/g depending on location of purchase.
*2 Complies with WPA2 with support for WPA/WPA2 Personal.
*3 The connected device should comply with IEEE802.3az.
Mechanical
Dimensions
Storage
Width: 449 mm (17.7 inches)
Depth: 380 mm (15.0 inches)
Height: 165 mm (6.5 inches)
Printing*
Width: 449 mm (17.7 inches)
Depth: 553 mm (21.8 inches)
Height: 188 mm (7.4 inches)
Weight
Approx. 5.3 kg (11.7 lb) without the ink cartridges and the power cord.
* With the output tray extension extended.
Electrical
100-120 V Model 220-240 V Model
Input voltage range
90 to 132 V 198 to 264 V
Rated frequency range
50 to 60 Hz 50 to 60 Hz
Input frequency range
49.5 to 60.5 Hz 49.5 to 60.5 Hz
Rated current
0.6 A 0.3 A
User’s Guide
Product Information
91

Table of Contents

Other manuals for Epson WorkForce WF-3010DW

Related product manuals