EasyManua.ls Logo

Epson WorkForce WF-3010DW - Preventing Paper Jams; Reprinting after a Paper Jam (for Windows Only)

Epson WorkForce WF-3010DW
103 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
D
Align the edges of the paper.
E
Keep the cassette flat and slowly and carefully reinsert it all the way into the product.
Preventing paper jams
If your paper jams frequently, check the following.
The paper is smooth, not curled or wrinkled.
You are using high-quality paper.
The printable side of the paper is face down in the paper cassette.
The printable side of the paper is face up in the rear paper feed slot.
The paper stack was fanned before loading.
For plain paper, do not load paper above the line just under the H arrow mark inside the edge guide.
For Epson special media, make sure the number of sheets is less than the limit specified for the media.
& “Selecting Paper” on page 14
The edge guides are snug against the edges of the paper.
The product is on a flat, stable surface that extends beyond the base in all directions. The product will not operate
properly if it is tilted.
Reprinting after a paper jam (for Windows only)
After you cancel the print job because of a paper jam, you can reprint it without reprinting pages that have already been
printed.
A
Solve the paper jam.
& “Paper Jams” on page 70
B
Access the printer settings.
& “Accessing the printer driver for Windows” on page 26
User’s Guide
Troubleshooting for Printing
76

Table of Contents

Other manuals for Epson WorkForce WF-3010DW

Related product manuals