Epson WorkForce WF-M1030 User Manual

Parent topic: Purchase Epson Ink Cartridges
Removing and Installing the Ink Cartridge
Make sure you have a replacement cartridge handy before you begin. You must install the new cartridge
immediately after removing the old one.
Caution: Leave your old cartridge in the printer until you are ready to replace it to prevent the print head
nozzles from drying out. Do not open the ink cartridge package until you are ready to install the ink.
Cartridges are vacuum packed to maintain reliability.
1. Turn on your product.
2. Lift up the printer cover.
Caution: Do not touch the flat white cable inside the printer.
3. Do one of the following:
• If the ink light is on, press the cancel button.
50

Epson WorkForce WF-M1030 Specifications

Printing Specifications

maximum print resolution	1440 x 720 optimized dpi
maximum print speed	34 ppm
ISO print speed	15.0 ISO ppm
minimum ink droplet size	3 picoliters

Connectivity

standard connectivity	Hi-Speed USB
wireless connectivity	802.11 b/g/n
ethernet connectivity	10/100

Paper Handling

maximum paper size	8.5" x 44"
input paper capacity	100 sheets plain paper, 10 envelopes
duplex printing	manual

Operating Environment

operating temperature	50 ° to 95 °F (10 ° to 35 °C)
storage temperature	-4 ° to 104 °F (-20 ° to 40 °C)
operating relative humidity	20 – 80%

Power

rated voltage	100 – 240 V
rated frequency	50 – 60 Hz
rated current	0.6 Amp

Weight and Dimensions

printing dimensions (W x D x H)	15.4" x 20.9" x 11.7"
storage dimensions (W x D x H)	15.4" x 10.4" x 5.8"
weight	7.1 lb