Epson WorkForce WF-M1030 User Manual

Warning: If ink gets on your skin, wash it thoroughly with soap and water. If ink gets into your eyes,
flush them immediately with water. If ink gets into your mouth, spit it out and see a doctor right away.
Keep ink cartridges out of the reach of children.
5. Before opening the new cartridge package, shake it gently four or five times.
Caution: Do not shake the cartridge after opening the package, or ink may leak.
6. Remove the cartridge from the package.
Caution: Do not touch the green chip or the small window on the cartridge. Install the new cartridge
immediately after removing the old one; if you do not, the print head may dry out and be unable to
print.
52

Epson WorkForce WF-M1030 Specifications

Printing Specifications

maximum print resolution	1440 x 720 optimized dpi
maximum print speed	34 ppm
ISO print speed	15.0 ISO ppm
minimum ink droplet size	3 picoliters

Connectivity

standard connectivity	Hi-Speed USB
wireless connectivity	802.11 b/g/n
ethernet connectivity	10/100

Paper Handling

maximum paper size	8.5" x 44"
input paper capacity	100 sheets plain paper, 10 envelopes
duplex printing	manual

Operating Environment

operating temperature	50 ° to 95 °F (10 ° to 35 °C)
storage temperature	-4 ° to 104 °F (-20 ° to 40 °C)
operating relative humidity	20 – 80%

Power

rated voltage	100 – 240 V
rated frequency	50 – 60 Hz
rated current	0.6 Amp

Weight and Dimensions

printing dimensions (W x D x H)	15.4" x 20.9" x 11.7"
storage dimensions (W x D x H)	15.4" x 10.4" x 5.8"
weight	7.1 lb