Epson WorkForce WF-M1030 User Manual

Lights
1
power
2 WiFi
3
paper
4 ink
Light status Condition/solution
The product is turned on.
The power light is on
The power light is flashing The product is busy. Wait for the power light to stop flashing before
turning off the product.
Paper is jammed in the product. Remove the jammed paper, and press
The paper light is flashing
the cancel button to clear the error.
No paper is loaded or multiple sheets fed at one time. Load paper in the
The paper light is on
product, and press the cancel button to clear the error.
The ink light is on The ink cartridge is expended, incompatible with the product, or not
installed correctly. Make sure the cartridge is installed correctly or
replace it, if necessary.
The ink light is flashing The ink cartridge is low. Make sure you have a replacement cartridge.
The ink pads are nearing or at the end of their service life. Contact
The ink and paper lights
Epson for support. (If the ink pads are not yet at the end of their service
are flashing alternately
life, press the cancel button to resume printing.)
72

Epson WorkForce WF-M1030 Specifications

Printing Specifications

maximum print resolution	1440 x 720 optimized dpi
maximum print speed	34 ppm
ISO print speed	15.0 ISO ppm
minimum ink droplet size	3 picoliters

Connectivity

standard connectivity	Hi-Speed USB
wireless connectivity	802.11 b/g/n
ethernet connectivity	10/100

Paper Handling

maximum paper size	8.5" x 44"
input paper capacity	100 sheets plain paper, 10 envelopes
duplex printing	manual

Operating Environment

operating temperature	50 ° to 95 °F (10 ° to 35 °C)
storage temperature	-4 ° to 104 °F (-20 ° to 40 °C)
operating relative humidity	20 – 80%

Power

rated voltage	100 – 240 V
rated frequency	50 – 60 Hz
rated current	0.6 Amp

Weight and Dimensions

printing dimensions (W x D x H)	15.4" x 20.9" x 11.7"
storage dimensions (W x D x H)	15.4" x 10.4" x 5.8"
weight	7.1 lb