10. Press the button.
Related Information
& “Entering Characters” on page 20
& “Checking the Network Connection Status” on page 41
& “When You Cannot Make Network Settings” on page 164
Making Wi-Fi Settings by Push Button Setup (WPS)
You can automatically set up a Wi-Fi network by pressing a button on the wireless routor. If the following
conditions are met, you can set up by using this method.
❏ e wireless router is compatible with WPS (Wi-Fi Protected Setup).
❏
e
current Wi-Fi connection was established by pressing a button on the wireless router.
1. Select on the home screen.
To select an item, use the
u
d
l
r
buttons, and then press the OK button.
2. Select Wi-Fi (Recommended).
3.
Press the OK button.
If the network connection is already set up, the connection details are displayed. Select Change Settings to
change the settings.
4. Select Push Button Setup (WPS).
User's Guide
Network Settings
37
To Next Page
Loading...
