7. Slide the side edge guides against the paper, but not too tightly.
Note: Make sure the paper is under the tabs on the edge guides.
8. Keep the cassette flat as you insert it until the arrow marks on the tray and product line up.
9. If prompted by the product's LCD screen, select the size and type of the paper you loaded, and
select Done.
Note: The output tray opens automatically when you print.
Always follow these paper loading guidelines:
• Load only the recommended number of sheets.
• Load paper short edge first and printable side facedown.
• Make sure the paper is under the tabs on the edge guides and not sticking out from the end of the
cassette.
59
To Next Page
Loading...
