Epygi QX200 Administrator's Guide

QX50/QX200/QX2000; (SW Version 6.0.x) 177
QX50/QX200/QX2000 Manual II: Administrator’s Guide
Parameter System Default Value
101 and 102 extensions are attached to the FXS lines 1 and 2 correspondingly
103-118 extensions attached to the IP lines 1-16 (for QX50)
103-126 extensions attached to the IP lines 1-24 (for QX200)
Kickback – disabled
Call Relay – disabled
Login Allowed-disabled
3pcc/Click2Dial Login Allowed-disabled
Audio Line-out-disabled
Show on Public Directory – disabled
Percentage of Total Memory for extensions 101-102 – 5%,
Percentage of Total Memory for extensions 103-118 – 0.4% (for QX50)
Percentage of Total Memory for extensions 103-126 – 0.4% (for QX200)
Extension Settings – General
(for QX2000)
Display name – none
Password – empty
1001-1200 extensions attached to the IP lines 1-200
Kickback – disabled
Call Relay – disabled
Login Allowed-disabled
3pcc/Click2Dial Login Allowed-disabled
Audio Line-out-disabled
Show on Public Directory – disabled
Percentage of Total Memory – 0.04%
Extension Settings – SIP
Registration username – same as extension number
Registration password - empty
SIP server - empty
SIP Server port – 5060
SIP Server Registration – disabled
Extension Settings – SIP Advanced
Authentication User Name – undefined
Send Keep-alive Messages to Proxy – disabled
RTP Priority Level – medium
Do Not use SIP Old Hold Method - disabled
Outbound Proxy, Secondary SIP Server and Outbound Proxy for Secondary SIP Server –
undefined
Extension Settings – Remote
Remote Extension – disabled
Extension Settings – Call Queue
Call Queue – disabled
Extension Settings – Voice Mailbox
Internal Voice Mail for all extensions
Configuration wizard – activated
Shared Mailbox – undefined
Extension Settings – Codecs
(for QX50/QX200)
For all extensions except 101 and 102:
Codecs - G711u (preferred), G711a, G729a – enabled
G726/16, G726/24, G726/32, G726/40, iLBC, G.722, G.722.1, TDVC, H.263,
H.263+ and H.264 – disabled
Out of Band DTMF Transport – enabled
T.38 FAX – enabled
Pass Through FAX – enabled
Pass Through Modem – disabled
Force Self Codecs Preference for Inbound Calls – disabled
SRTP Policy – Make unsecure calls, accept anything
For extensions 101 and 102:
Codecs - G711u (preferred), G711a, G729a, G726/32, G726/16, G726/24,
G726/40– enabled
iLBC, G.722, G.722.1, H.263,H.263+ and H.264 – disabled
Out of Band DTMF Transport – enabled
T.38 FAX – enabled

Epygi QX200 Specifications

General

Brand	Epygi
Model	QX200
Category	Network Hardware
Language	English