Epygi QX200 Administrator's Guide

QX50/QX200/QX2000; (SW Version 6.0.x) 178
QX50/QX200/QX2000 Manual II: Administrator’s Guide
Parameter System Default Value
Pass Through FAX – enabled
Pass Through Modem – disabled
Force Self Codecs Preference for Inbound Calls – disabled
SRTP Policy – Make unsecure calls, accept anything
Extension Settings – Codecs
(for QX2000)
Codecs - G711u (preferred), G711a, G729a – enabled
G726/16, G726/24, G726/32, G726/40, iLBC, G.722, G.722.1, TDVC, H.263, H.263+ and
H.264 – disabled
Out of Band DTMF Transport – enabled
T.38 FAX – enabled
Pass Through FAX – enabled
Pass Through Modem – disabled
Force Self Codecs Preference for Inbound Calls – disabled
SRTP Policy – Make unsecure calls, accept anything
Attendant 00 Settings – General
(for QX50/QX200)
Display name – Attendant
FAX forwarding – disabled
Show on Public Directory – enabled
Percentage of System Memory – 5%
Attendant 00 Settings – General
(for QX2000)
Display name – Attendant
FAX forwarding – disabled
Show on Public Directory – enabled
Percentage of System Memory – 0.08%
Attendant 00 Settings – Attendant
Scenario
Scenario – default
Send AA digits to Routing Table – disabled
Redirection on Timeout – disabled
ZeroOut – disabled
Welcome Message – enabled
Ringing Announcement – disabled
Welcome Message, Recurring Attendant Prompt and Attendant Ringing Announcement
– default
Attendant 00 Settings – SIP
Registration username – 00
Registration password - empty
SIP server - empty
SIP Server port – 5060
SIP Server Registration – disabled
Attendant 00 Settings – SIP Advanced
Same as for extensions
Attendant 00 Settings - Codecs
Codecs - G711u (preferred), G711a, G726/16, G726/24, G726/32, G726/40, G729a,
iLBC – enabled
H.263, H263+ and H.264 – disabled
Out of Band DTMF Transport – enabled
T.38 FAX – enabled
Pass Through FAX – enabled
Pass Through Modem – disabled
Force Self Codecs Preference for Inbound Calls – disabled
SRTP Policy – Accept anything
Conference Management and Email
Default Settings
Feature is disabled by default
Universal Extension Recordings
For
QX50/QX200
: Percentage of System Memory – 1%
For QX2000: Percentage of System Memory – 0.08%
Extension Directory
No entries
Receptionist Management
No entries
ACD Management
Undefined
Authorized Phones Database
No entries
IP Lines Settings
IP Lines Configuration:
Enable PnP for IP lines – enabled

Epygi QX200 Specifications

General

Brand	Epygi
Model	QX200
Category	Network Hardware
Language	English