26
02
Connection to power supply
1. Make sure the rotatable On/Off switch (18) is not pressed down.
2. Connect the power cord plug (21) with a suitable socket.
WARNING! Check the voltage! The voltage must comply with the
information on the rating label!
3. Your product is now ready to be used.
Use
Intended use
This spray gun is ideal for a wide variety of uses. The intended uses include the
mechanical spraying of liquid, such as paints containing solvents or water-based
paints on components, surfaces, etc.
For safety reasons it is essential to read the entire instruction manual before rst
operation and to observe all the instructions therein.
This product must not be used for any purposes other than those described.
Before you start
01
Protection
MNL_Erbauer_GB_EPS800_800W paint sprayer_V1_201020.indd 26 10/20/20 5:03 PM
To Next Page
Loading...
