30
Care & maintenance
WARNING! Always switch the product off, disconnect the product from
the power supply and let the product cool down before performing
inspection, maintenance and cleaning work!
Clean
1. Clean the product with a dry cloth. Use a brush for areas that are hard to reach.
2. In particular clean the switches and air vents after every use with a cloth and brush.
3. Remove stubborn dust with high pressure air (max. 3 bar).
01
Paint sprayer (Figs. Q, R, S)
WARNING! Never use metal or other objects that could damage the
holes in the air cap, spray nozzle and nozzle needle. Never immerse the
product completely in solvent or other liquids.
NOTE: Do not use chemical, alkaline, abrasive or other aggressive
detergents or disinfectants to clean this product as they might be harmful
to its surfaces.
It is vital that thorough cleaning is carried out after each use to keep this
product working efciently. Failure to do so will stop the tool working
correctly and may invalidate the warranty.
1. Clean the product immediately after each use as detailed below. Also, if the product
clogs up during use, carry out the same cleaning procedure.
2. Release the switch trigger (8) and switch the product off.
3. Clean all the outer surfaces and the spray head after each use with a slightly damp
cloth and a little soap. Use a cleaning brush (32) for hard to reach places.
MNL_Erbauer_GB_EPS800_800W paint sprayer_V1_201020.indd 30 10/20/20 5:03 PM
To Next Page
Loading...
