Erbauer EPS800 - Recycling and Disposal

36
4. Paint pattern
curvy
4.1 Spray nozzle loose or
worn
4.1 Tighten spray nozzle or
replace
4.2 Spray nozzle / nozzle
needle plugged up
4.2 Clean or replace spray
nozzle / needle
5. Irregular paint
pattern
5.1 Spray nozzle / needle
plugged up
5.1 Clean or replace spray
nozzle / needle
5.2 Spray nozzle dirty or worn 5.2 Clean or replace spray
nozzle
6. Paint pattern
centre narrow
6.1 Not enough paint in paint
container or viscosity too
low
6.1 Rell paint, mix viscosity
according to manufacturer
recommendation
6.2 Fluid output 6.2 Adjust uid output
7. Uneven paint
pattern
7.1 Viscosity too high 7.1 Mix viscosity according
to manufacturer
recommendation
7.2 Fluid output 7.2 Adjust uid output
Recycling and disposal
Waste electrical products should not be disposed of with household
waste. Please recycle where facilities exist. Check with your local
authority or local store for recycling advice.
Old products are potentially recyclable and do not, therefore, belong in your
household rubbish. You are requested to assist us and our contribution to
saving resources and protecting the environment by handing in this product at
an equipped collection centre (if there is one available).
Dispose of paint and thinning agent in closed containers at a suitably authorized
disposal company. Take account of national and local disposal regulations.
The product comes in a package that protects it against damage during shipping.
Keep the package until you are sure that all parts have been delivered and the product
is function properly. Recycle the package afterwards.
MNL_Erbauer_GB_EPS800_800W paint sprayer_V1_201020.indd 36 10/20/20 5:03 PM