8
n) Never manipulate the product and always use the safety
and/or protective guards on the product to avoid risks.
o) Risk of injury: Do not direct the product towards people or
animals.
p) Never smoke during the paint process.
q) Always ensure sufcient circulation of fresh air.
r) Never use paint containing lead.
s) Before any work (such as transport, construction,
conversion, cleaning or maintenance) and when the
product is not being used, disconnect it from the power
supply and empty the paint container!
The following information applies to professional users
only but is good practice for all users:
VIBRATION
The European Physical Agents (Vibration) Directive has
been brought in to help reduce hand arm vibration syndrome
injuries to power tool users. The directive requires power tool
manufacturers and suppliers to provide indicative vibration
test results to enable users to make informed decisions as to
the period of time a power tool can be used safely on a daily
basis and the choice of tool.
SEE TECHNICAL SPECIFICATIONS IN THE INSTRUCTION
MANUAL FOR THE VIBRATION LEVELS OF YOUR TOOL.
The declared vibration emission value should be used as a
minimum level and should be used with the current guidance
on vibration.
Calculating the actual period of use can be difcult and the
HSE website has further information.
The declared vibration total value has been measured in
accordance with EN 60745-1 and EN 50580 and may be used
for compare one tool with another.
The declared vibration total value may also be used in a
preliminary assessment of exposure.
MNL_Erbauer_GB_EPS800_800W paint sprayer_V1_201020.indd 8 10/20/20 5:03 PM
To Next Page
Loading...
