34
Transportation
1. Switch the product off and disconnect it from the power supply
2. Wrap the power cord (21) onto the cord holders (20b) of the air hose bracket (20)
and secure it with the cord clip (21a) (Fig. U).
3. Disconnect the air hose (13) from the air inlet attachment point (11) and the air
outlet attachment point (19). Store the air hose (13) between two air hose brackets
(20) (Fig. U).
4. Store the spray gun handle (25) and the paint container (27) in the storage
compartment (14) (Fig. U).
5. Release the brakes (24b) on the two rear wheels (24). Always carry the product by
its transport handle (17).
6. The product is supplied with a 2-step-extension handle. Press the lock button (17a)
(Fig. V, step 1) and pull the upper extension (16) upwards to the end (Fig. V, step
2). Continue to pull out the lower extension (15) and ensure the locking pin (15a) is
clicked into the place (e.g. locking hole) (Fig. V, step 3).
7. Protect the product from any heavy impact or strong vibrations which may occur
during transportation.
8. Secure the product to prevent it from slipping or falling over, damage and injury.
Storage
1. Switch the product off and disconnect it from the power supply.
2. Clean the product as described above.
3. Store the product and its accessories in a dark, dry, frost-free, well-ventilated
place.
4. Always store the product in a place that is inaccessible to children. The ideal
storage temperature is between 10°C and 30°C.
5. We recommend using the original package for storage or covering the product with
a suitable cloth or enclosure to protect it against dust.
MNL_Erbauer_GB_EPS800_800W paint sprayer_V1_201020.indd 34 10/20/20 5:03 PM
To Next Page
Loading...
