Erbauer ERB337TCB - Storage, Transportation, and Disposal

REPAIR
- This product does not contain any parts that can be repaired by the consumer.
Contact a qualified specialist to have it checked and repaired.
- Apart from diamond discs there are no other user serviceable parts inside this tile
cutter. Refer to qualified service personnel if internal maintenance is required.
Any worn, or damaged parts should be replaced immediately by qualified personnel.
Keep discs in good condition. Poor condition or worn discs can increase the noise
level emitted.
- If the supply cable is damaged, it should be replaced by the same type of cable
as the one provided and recommended by the manufacturer (H05 VV-F3G0.75
mm²). The supply cord of the tool and any extension cord used should be checked
frequently for damage.
- If damaged, have the cord set replaced by an authorised service facility. Replace
the extension cord if necessary.
STORAGE
- Switch the product off and disconnect it from the power supply.
- Clean the product as described above.
- Store the product and its accessories in a dark, dry, frost-free, well-ventilated
place.
- Always store the product in a place that is inaccessible to children. The ideal
storage temperature is between 10°C and 30°C.
- We recommend using the original package for storage or covering the product
with a suitable cloth or enclosure to protect it against dust.
TRANSPORTATION
- Switch the product off and disconnect it from the power supply.
- Attach transportation guards, if applicable.
- Always carry the product by its main handle.
- Protect the product from any heavy impact or strong vibrations which may occur
during transportation in vehicles.
- Secure the product to prevent it from slipping or falling over.
RECYCLING AND DISPOSAL
Waste electrical products should not be disposed of with household waste.
Please recycle where facilities exist. Check with your Local Authority or retailer
for recycling advice. For further information visit www.recyclemore.co.uk.
23
EN