Safety intructions
WARNING! When using electric tools basic safety
precautions should always be followed to reduce the
risk of fire, electric shock and personal injury including
the following.
Read all these instructions before attempting to operate
this product and save these instructions.
1. Keep work area clear.
> Cluttered areas and benches invite injuries.
2. Consider work area environment.
> Do not expose power tools to rain.
> Do not use tools in damp or wet locations.
> Keep work area well lit.
> Do not use tools in the presence of flammable liquids or gases.
3. Guard against electric shock.
> Avoid body contact with earthed or grounded surfaces (e.g. pipes, radiators,
ranges, refrigerators).
4. Keep other persons away.
> Do not let persons, especially children, not involved in the work touch the tool
or the extension cord and keep them away from the work area.
5. Store idle tools.
> When not in use, tools should be stored in a dry locked-up place, out of reach
of children.
6. Do not force the tool.
> It will do the job better and safer at the rate for which it was intended.
7. Use the right tool.
> Do not force small tools to do the job of a heavy-duty tool.
> Do not use tools for purposes not intended; for example do not use circular
saws to cut tree limbs or logs.
8. Dress properly.
> Do not wear loose clothing or jewellery, they can be caught in moving parts.
> Non-skid footwear are recommended when working outdoors.
> Wear protective hair covering to contain long hair.
9. Use protective equipment.
GENERAL POWER TOOL SAFETY WARNINGS
07
EN
To Next Page
Loading...
