SPECIFIC SAFETY RULES & SYMBOLS
WARNING!
Do not operate machine if warning and / or instruction labels are missing or damaged.
Symbol Description
V Volts
A Amperes
Hz Hertz
Min
-1
DC
Speed RPM
Direct Current
~ Alternating Current
no No Load Speed
Double Insulated
Wear Safety Goggles
Wear Ear Protection
Wear Dust Mask
Read Instruction Manual
Laser Warning Symbol
Conforms to relevant
safety standards
Only use genuine Erbauer replacement saw blades. Unauthorised blades may be
dangerous! Keep saw blades securely fastened. Check the blade anges for debris
before installing any new blade. Do not use dull, broken or damaged blades. Check the
blade regularly for condition and wear. A damaged or worn blade should be replaced
immediately. Beware of ejecting chips as they may be HOT. Always make provision for
the safe handling of excess material. Keep the machine base and rotary table free from
dirt and other debris.
For indoor use only
General Warning
Charging time
Max charging temperature
Do not throw into re
Do not throw into water
or expose to rain
90 min
ERBAUER 24V 165MM SINGLE BEVEL MITRE SAW
To Next Page
Loading...
