Erchonia EVRL - Completing EVRL Treatments; End of Treatment Procedures; Proper EVRL Device Power Off

Page 15
ERCHONIA® EVRL™ PROPER USE REFERENCE GUIDE
8. The Erchonia® EVRL™ treatment will run for 5 continuous minutes and
will stop once treatment time is at 0:00. Once the “Time Remaining”
display reaches 0:00 the treatment is complete, the laser lights and
the laser indicator light will turn off.
9. Step 4-7 is then repeated over the opposite foot. Both the right and
left foot will receive 5-minute treatment each.
10. After you have treated both your right and left foot, the treatment is
complete, and you may remove the safety glasses.
Powering OFF the device
To properly power down the device, press and release the Power Button (Ref in ITEM #1)
while on any screen, this will prompt the “Power Down Device Screen”. Touch the “Power
Down Device” icon. The Powering Down Screen will display until the device is properly shut
down.
Fig 1. Treatment
Fig 2. Treatment Close Up