ERCHONIA® EVRL™ PROPER USE REFERENCE GUIDE
Page 3
SYMBOLS USED ON THE EQUIPMENT
Any or all of the following symbols may be used in this reference guide or on the
equipment:
Temperature Limitation
Conformité Européenne - Complies with EMC 2004/108/EC and LVD 2006/95/EC.
Power ON/OFF
Date of Manufacture
Manufacturer
Authorized representative in the European Community.
Serial Number
Refer to Operating Instructions.
Warning alerts you about a situation which, if not avoided, could result in death or serious
injury. It may also describe potential serious adverse reactions and safety hazards.
Caution is used for the statement of a hazard alert that warns you of a potentially
hazardous situation which, if not avoided, may result in minor or moderate injury to the
user or patient or damage to the equipment or other property. It may also be used to alert
against unsafe practices. This includes the special care necessary for the safe and
effective use of the device and the care necessary to avoid damage to a device that may
occur as a result of use or misuse.
WEEE Symbol- Separate Collection Recommended
DO NOT STARE INTO LASER BEAM
To Next Page
Loading...
