ERCHONIA® EVRL™ PROPER USE REFERENCE GUIDE
Page 5
CAUTION
x Read, understand, and practice the precautionary and operating instructions.
Know the limitations and hazards associated with using any laser device.
Observe the precautionary and operational decals placed on the device.
x DO NOT place/operate this device in close proximity (15 cm) to other devices
that emit frequency.
x DO NOT use sharp objects such as a pencil point or ballpoint pen to operate
the buttons on the touch screen as damage may result.
x There are no user-serviceable parts inside the device. If a malfunction
occurs, discontinue use immediately and contact Erchonia Corporation for
repair service.
x DO NOT permit any foreign materials or liquids to enter the device. Take
care to prevent any foreign materials including, but not limited to,
inflammables, water, and metallic objects from entering the device. These
may cause device damage, malfunction, electrical shock, fire, or personal
injury.
x To achieve the specified level of protection against spilled or splashed
liquids, thoroughly dry all exposed surfaces of this device and allow to dry
thoroughly prior to operation
x Avoid contact with flammable anesthetic or air with oxygen or nitrous oxide.
x If you have difficulty operating the device after carefully reviewing this
reference guide, contact your Sales Representative for assistance.
To Next Page
Loading...
