Cleaning and maintenance
36
WARNING!
Acrylic glass panels unusable due to soiling!
Soiling on the panels is burned in by the hot lamps and
results in the long term in unserviceable panels.
– Remove fingerprints and other soiling carefully.
Plastic surfaces
For cleaning the remaining painted and unpainted plastic surfaces, it is best to
simply use warm water and a leather cloth. Never use aggressive cleaning
agents containing alcohol or essential oils. These may lead, in the long run, to
damages not covered by the guarantee.
During cleaning a slight discolouration of the leather cloth by the rubber seals
must be expected for production-related reasons.
Prevent damage to the acrylic glass and plastic surfaces.
– Remove rings, watches, bracelets etc. before starting cleaning work.
5.3.2 Filter panels and lamps
y Low pressure UV lamps and filter panels can be cleaned with a damp
cloth and without additional cleaning agents where necessary.
y High pressure UV lamps can be cleaned with ethyl alcohol where neces-
sary.
5.4 Cleaning plan
To Next Page
Loading...
Need help?
General
