Cleaning and maintenance
09/2011 1002410-04 Operating instructions – 47
5.8.5 High pressure lamps and filter panels
UV high pressure lamps are used in facial tanners.
DANGER!
Fire hazard due to overheated lamps!
Non-approved high pressure lamps can explode. Hot lamp
components can set other parts on fire. People can be killed
or severely injured due to smoke inhalation and fire.
– Only fit the high pressure lamps specified by the manu-
facturer.
– Clean the inside of the device regularly. Dust particles
are flammable!
– Release the clamping holder.
– Lift the filter panel, pull it out of the guide and remove it.
– Unplug the UV lamps.
– Clean the reflector.
– Only utilize original UV lamps.
To Next Page
Loading...
