ergoline AFFINITY 660 DYNAMIC POWER - Cleaning the Filter in the Base

Cleaning and maintenance
54
5.18 Cleaning the filter in the base
– Opening the bed base: see page 43.
– Remove the filter.
– Cleaning the filter when moist or dry.
Dry cleaning: Vacuum cleaner (depending on the degree of soiling)
Moist cleaning: Use water and detergent or put in a dish-washer
WARNING!
The device may be damaged by moisture!
The cleaned filters must be dry before they are replaced.
– Refit the cleaned and dried filters.
– Close the bed base. You should hear the bed base click into place.