Cleaning and maintenance
09/2011 1002410-04 Operating instructions – 61
5.22.2 Replacing the AQUA FRESH canister
– Opening the bed base: see page 43.
– Remove the canister.
– Unscrew the lid on the new canister.
– Remove the lid with the hose from the old canister.
– Screw the lid with the hose onto the new canister.
– Push the hose well down so that it touches the bottom of the canister.
– Put the canister back in the device.
– Close the bed base. You should hear the bed base click into place.
Venting
NOTE:
Ventilate after changing the canister by switching over to
preset mode and then select Function 231 (see
'Voreinstellungen/Presettings', order no. 1008953-..).
To Next Page
Loading...
