Not for commercial use
– Ericsson Inc.
Learning About Your Terminal 21
Status Indicator shows the operating status of your
terminal or call type. For example,
is shown
during a call and
or
is shown during
standby.
Battery Strength Icon shows the strength of your
battery. A full icon indicates a fully-charged battery.
Indicator Light Functions
The color and state of the indicator light on top of your
terminal indicates the following conditions:
Slow Flashing Orange indicates that the terminal is
in vibration only mode.
Slow Flashing Green indicates that the terminal is
in standby.
Rapid Flashing Green indicates that the terminal is
receiving a call.
Steady Green indicates that the terminal is receiving
power from an external source, such as a travel
charger.
Flashing Red indicates that the terminal’s battery
power is low.
Key/Button Function
• Press and hold to turn your terminal On.
• Press to place a call while in Phone Mode.
• Press to answer a call.
• Press to store menu settings.
• Press and hold (after entering a number) to make a
calling card call while in Phone Mode.
• Press and hold (during a call) to send displayed
numbers as tones.
• Press during a call to switch between calls (call wait-
ing or three-way calling features must be activated
by your service provider).
• Press to recall the last number dialed when your ter-
minal is in standby.
• Press and hold to turn your terminal On or Off.
• Press to end a call.
• Press to exit a menu without saving changes made
in the menu.
• Press to temporarily mute the ringer when receiving
a call.
Ditto Lornetta.book Page 21 Thursday, July 13, 2000 3:55 PM
To Next Page
Loading...
