Ericsson R250d PRO - Specifying a Memory Location

Not for commercial use
– Ericsson Inc.
" %&
 Enter the phone number you want to store.
Note! To enter letters from the keypad, you must press a key
from one to five times, depending on which letter you
want to enter.
 Press

to store the number. Stored in
memory! is shown in the display.
Storing a Number Shown in the Display
 Enter a number.
 With the number shown in the display, press
Ô
to
access Menu Mode.
 Press
Ô
or
Ñ
until the menu pointer is beside
Memory.
 Press

to open the MEMORY Menu.
 Press
Ô
until the menu pointer is beside Store
Mem.
 Press

to open the Store Mem selection. The
number is shown in the No: line of the Store Mem
display.
 If you want to enter a name to be associated with
this number, enter it now on the Name: line.
 Press

to store the number in memory.
Specifying a Memory Location
If you want to store a phone number in a specific mem-
ory location, follow the previous steps for entering the
number and name, then press
Ô
to move the cursor to
the STORE: line. Enter the memory location number.
Phone numbers stored in locations one through nine can
be used with the Super Dial feature in Phone Mode. All
one- and two-digit memory locations can be used with
the Speed Dial feature for Phone Mode and Radio Mode.
Storing a Number in Secure Memory
A number stored in secure memory cannot be recalled
unless you enter the correct security code. To store a
number in secure memory, follow the previously
Press
This
Number of Times
One Two Three Four Five
1space&1
2ABC2
3DEF3
4GHI 4
5J KL5
6MNO6
7PQRS7
8TUV8
9WXYZ9
00
*, ‘“*
#- . ? #
Ditto Lornetta.book Page 38 Thursday, July 13, 2000 3:55 PM