Ericsson R380 - Page 100

100 Settings
Note: These codes are operator dependent. For information about
the area information services that you can use, please refer to the
information supplied by your network operator. This feature may not
be available on all networks.
To edit an area information channel setting:
1. From within the Extras tab, tap Preferences.
2. Tap Messaging then select Area info channels.
3. Scroll and select the channel.
The Edit channel view appears.
4. Do one of the following:
• To edit the three digit channel code, select Channel
code:
and edit the code.
• To turn the channel code on or off, select Subscription:
and then select
Inactive, Active or Auto-store.
5. Tap to implement and save the new settings. The Area
info channels view displays.
To create a new area info channel:
1. From within the Extras tab, tap Preferences.
2. Tap Messaging then select Area info channels.
3. Tap and select New channel.
The New channel view displays.
4. Do one of the following:
• Select Channel code: and enter the three digit channel
code.
or
• Select Subscription: and then select Inactive, Active or
Auto-store.
5. Tap to implement and save the new settings.
024 Pharmacies 059 Customer care
(international)
030 Long-distance road reports 040 Weather
032 Local road reports 050 District cell information
034 Taxis 052 Network information
Code: AI Message Type: Code: AI Message Type:
OK
OK
Note: Some
settings are
network and
operator
dependent.