R380 Communications Suite 223
To install R380 as a modem:
1. Make sure you have installed the R380 Communications
Suite. If not, you can also install the modem if the R380
CD is inserted in the computer’s CD-ROM drive.
2. Click Start|Settings|Control Panel and double click
Modems.
The Install New Modem wizard starts. If it does not start
at once, it is because you already have a modem installed.
Click Add to start the wizard.
3. Follow the instructions in the wizard.
Most modern SIM cards automatically set the language in your
smartphone to the language of the country where you bought
your SIM card. If this is not the case, the pre-set language is
English. If you want to change language in your smartphone you
can do this from the Ericsson CD.
Note: English is always available from your R380.
To ch a n g e t he l an g ua g e :
1. Connect the serial cable.
2. Insert the Ericsson CD and it starts automatically.
3. Select the language to use for the CD and click OK.
4. Click Change Language in R380 under the
Communications heading.
5. In the dialog box which appears, select the language you
want to change to in the drop-down list box and click
OK
to proceed.
6. Click Yes to confirm that you want to change to the chosen
language.
7. When the change of language has been successfully
completed you must disconnect your R380, turn it off and
turn it on again.
Note: When changing the language, settings for the
keyboard layout, time format, date format, decimal symbol
and sorting order changes to the default settings for that
country. You can always switch between two different
Changing the Language in your R380
To Next Page
Loading...
