Ericsson R380 - Initial Settings

Preparing for Use 15
4. Press YES.
On finding a network, the name given by your network
operator or a supporting associate operator network
appears.
Note: If you enter your PIN incorrectly three times in a row,
the SIM card is blocked. You can unblock it by using your
PIN Unblocking code (PUK). See “Unblocking PUK Code”
on page 74 for more information.
Note: If
Enter code appears in the ‘Phone locked’ message
display, enter your phone lock code. See “Security” on page 73
for more information.
To turn your R380 off:
In standby mode, press and hold until you hear a tone.
Setting Display Language
After turning on your R380 for the first time, you are asked to
select your preferred language.
To select a language:
1. Scroll with to find and highlight your choice.
2. Press to confirm your selection.
3. Turn your R380 off, wait for the phone to completely
power down, and then turn back on again to activate the
language.
For effective use of your R380, some initial settings and
preferences need to be set up. In general, most settings can only
be set up with the flip open. This includes and covers most flip
closed functions.
Time and Date
Messaging and Calendar programs are dependent on correct
time and date settings, which can be set using the Clock
program.
Initial Settings
SIM card locked
****
Enter PIN: