Ericsson R380 - Wap

Getting started with E-mail and WAP 191
Using E-mail with Several Configurations Installed
Your R380 can read mail from several e-mail accounts. When
you select an e-mail account to connect to, see above, it is
important that you select the service provider associated with
that account. Otherwise the send mail operation may fail and
you will be unable to access the remote inbox. Try to set the
names of the internet service provider and the e-mail accounts so
that you will easily remember which one to use, e.g. SP Acme
Internet, Mail at Acme.
To contact a WAP site from the R380 you must have set up:
• a network operator subscription with GSM data connection.
• a Service provider.
• a WAP gateway.
GSM Data Service
Your network operator needs to give you access to GSM data
service which allows you to make a data call to the service
provider. If you are unsure contact your network operator and
enquire whether your phone will accept data calls.
Service Provider
Your service provider could be any of the following:
• an access point provided by your network operator.
• your internet service provider.
• a private service provider, e.g. your company or bank.
You need to enter specific service provider details into the R380.
The R380 can hold the details of multiple service providers, this
is because you may have separate internet and corporate
accounts. For more details see “Manually Set up a Service
Provider” on page 188.
WAP
WAP
Site
WAP
Gateway
Service
Provider
Network
Provider
NETWORK
18-05-00
12:00