EasyManua.ls Logo

Ericsson R380 - Turning on the Phone

Ericsson R380
262 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
14 Preparing for Use
Move the R380 plug downward so that it fits securely
with the R380 connector.
3. Plug the charger into the electrical outlet.
To remove the plug:
Tilt the plug upward and pull it away from the R380 connector.
Warning! The power supply plug may look different depending on
the electrical socket in your country. Do not connect the AC-plug-in
unit to any other item than your Ericsson Travel Charger CTR-10.
Do not separate it from the charger when plugged into the wall
socket.
Note: See “BATTERY INFORMATION” on page 237 for more
information about battery safety.
The
NO button on your keypad turns your R380 on or off.
Tip! The term press and hold is equivalent to a key press time of
approximately 2 seconds.
To turn your R380 on:
1. Ensure that your SIM card is in your R380, the battery is
charged and the flip is closed.
2. Press and hold until you hear a tone and the display
turns on.
The Ericsson logo displays.
3. If Enter PIN: appears:
Enter your PIN. If you make a mistake while entering your
PIN, erase the wrong number by pressing clear. The
code you enter appears as asterisks (*), unless 1 or 9 is
entered as the first digit. (For example, if you were calling
an emergency number.)
Turning on the Phone

Table of Contents

Other manuals for Ericsson R380

Related product manuals