196 Getting started with E-mail and WAP
To select the service provider from the list presented when you
make a connection:
1. Make a connection.
2. Tap the required service provider to highlight it (the last
service provider you used will be highlighted by default).
3. Tap to initiate connection.
If you need to change the gateway, you may do so before
connecting or during a connection:
1. Tap Extras, select System, Preference, WAP services,
Gateway from the display.All of the configured gateways
will be listed with (Current) indicating the one in use.
2. Tap the required gateway to select it.
3. Tap and select Set as current.
4. Tap , the selected gateway will now become the current
gateway.
If you want to use your R380 with the same internet service
provider as your PC, the following table tells you where you can
find the necessary settings.
1. On the Windows desktop double-click My Computer,
double-click Dial-Up Networking and click on the icon
representing the internet service provider to be set up on
the R380.
Locating Settings in Windows 95 or 98
OK
OK
To Next Page
Loading...
