Ericsson R380 - Page 103

Settings 103
3. Select Key phrase:, enter the key phrase and then tap . If
the key phrase is incorrect a warning message displays.
Otherwise, a third Initialize Safeword view displays.
4. Select User ID: and enter your user identification.
5. Select Choose PIN: and enter a PIN.
6. Select Confirm PIN:, then enter the PIN that was entered in
the previous step and then tap .
7. One of the following occurs:
• If the PIN’s do not match or the user ID is incorrect a
warning message displays.
or
• A message confirming that the Safeword has been
successfully initialized displays. Select
OK to return to the
Access Passwords view. Change Safeword PIN displays.
To change the Safeword PIN:
1. Select Change Safeword PIN: from the list displayed in the
Access Passwords view.
The Change Safeword PIN view displays.
2. Select Old PIN: and then enter your PIN.
3. Select New PIN: and then enter a new PIN.
4. Select Confirm PIN:, then enter the PIN number that was
chosen in the previous step and then tap .
If any of the PINs are incorrect a warning message displays.
Otherwise, you see a message telling you that the Safeword
PIN has been successfully initialized. Select
OK to return to
the Access passwords view.
To view your serial number:
Select
Get serial number from the list displayed in the Access
Passwords view. The serial number view displays providing you
with the serial number of the initialised authentication token
(SecurID or SafeWord).
OK
OK
OK
Tip! For
general
instructions on
changing
settings, see
“Customizing
Settings” on
page 79.