Ericsson R380 - Page 107

Settings 107
• Service provider: Select which service provider to use.
• Gateway: Enter the IP address for the WAP gateway.
• Gateway username: Enter the your username for the
gateway.
• Gateway password: Enter your password.
• Confirm password: Re-enter your password for
confirmation.
• Security: Select whether or not you want the Security
on. If
On is selected, all data sent to and from the
gateway will be encrypted. Default is
Off.
• Connection mode: Select the connection type: either
Connectionless or Connection oriented.
6. To set the gateway as the current (default) gateway, tap
and select
Set as current.
7. Tap to implement and save the new settings. The
display returns to the WAP profile view.
To change or delete a profile’s settings:
1. From within the Extras tab, tap System and choose
Preferences.
2. Select WAP Services from the list.
The WAP Services settings view displays.
3. Select WAP profiles.
The WAP profiles view displays listing the available
profiles.
4. Select the profile from the list that you want to change or
delete.
An Edit view appears containing the name of the profile in
the title bar.
5. You can now do one of the following:
• Edit the information that you want to change.
or
• Delete the profile by tapping and select Delete.
6. Tap to implement and save the new settings.
The WAP profiles view.
OK
OK
Tip! For
general
instructions on
changing
settings, see
“Customizing
Settings” on
page 79.