184 Getting started with E-mail and WAP
Automatically Set up Service Provider and E-mail
The easiest way to set up the R380 is automatically, through
your service provider. Check your service provider’s web site for
information or telephone/e-mail their support desk and ask
about automatic remote configuration.
If remote configuration is possible, tell your service provider that
you require internet service provider and e-mail settings, they
will send you an auto configuration message for these by SMS.
To automatically set up service provider and e-mail:
1. When the auto configuration messages appear in the
R380 inbox, select it.
2. A brief text and operator message displays with the message
Configure now?. To initiate the auto configuration, select
Yes. To perform the auto configuration later, select No.
3. Send an e-mail to test the new settings, see “Sending an E-
mail for the First Time” on page 189 for more details.
Warning!
Never accept remote configuration messages if you are
not expecting them or are unsure where they have come from.
Manually set up Service Provider and E-mail
Alternatively you can enter the service provider and e-mail
settings yourself. First collect all the information you will need.
You can obtain this information from one of the following
sources:
• If your mobile operator offers an e-mail service you can get
the necessary details from them.
• Your internet service provider.
Yes
No
Auto Configuration
New ISP settings have been
received from Europolitan
Configure now?
To Next Page
Loading...
