Ericsson R380 - Manually Set up E-mail

188 Getting started with E-mail and WAP
Manually Set up a Service Provider
To manually set up a service provider:
1. With the flip open, tap Extras, System, Preferences and
Service Providers.
2. Tap and select New service provider.
3. Use the information from the previous table, see “Manually
set up Service Provider and E-mail” on page 184, to
complete the form. Use the scroll bar to see all the items.
Additional fields you need to fill in are:
Name: A name which identifies the service provider when
you connect to e-mail or WAP, you can enter anything,
e.g. Acme Internet, WAP SP, BigCorp
Confirm Password: A check to make sure that you have
entered the password correctly
4. Once all the details are entered, tap .
You have successfully set up your service provider, the next
step is to set up an e-mail account.
Manually Set up E-mail
To manually set up e-mail:
1. With the flip open, tap Extras, System, Preferences and
Messaging. From the messaging display select e-mail
accounts
(you need to scroll down to find it).
2. Tap the and select new e-mail account.
New service provider
Name:
Tel. number:
Bearer capability:
Username:
Password:
Confirm password:
<Enter name>
<Enter phone number>
<Enter password>
<Enter password>
<Analogue>
<Enter username>
OK