Ericsson R380 - Page 203

Extras 203
Setting the Current and Destination Time Zone
To select the current and destination time zone:
1. Tap and select Timezones.
The Timezones view displays.
2. Select the Auto timezone to specify whether or not the
destination clock is to use network time.
Your options are:
• On - a network time update is received
• Off - Auto timezone is not used and must be manually
set.
Note: Network time is not supported by all networks.
3. To specify how the timezones are displayed, tap the
Timezone Display and select UTC+offset, for instance, Co-
ordinated Universal Time (UTC) + number of hours of
offset, or
Zone name, such as CET (+1 (number of hours
of offset from UTC/)).
Note: UTC (Co-ordintated Universal Time) is the same
thing as GMT (Greenwich Mean Time). See “UTC and
timezone table” on page 204.
4. Select Home zone: and use the left and right scroll arrows to
select the required time zone.
5. Select Destination zone: and use the left and right scroll
arrows to select the required time zone.
6. Select the Daylight saving section you want to change, for
example, Home or Destination, and select
On or Off.
7. Tap to accept and save any changes you have made to
the time zones.
Timezones
Auto timezone:
Timezone display:
Home zone:
Daylight saving:
Destination zone:
Daylight saving:
<On>
<UTC + Offset>
<Off>
<Off>
UTC+0
UTC+0
OK