24 Preparing for Use
un-highlighted as the stylus moves past them. Any lines, that
were highlighted from a previous tap and drag movement stay
highlighted.
The Desktop
On opening the flip, your R380 shows the equivalent or nearest
function that was active with the flip closed. For example, if a
contact within the Phone book is displayed and the flip is
opened, the contact’s full record within Contacts displays.
Note: A desktop view is shown for functions that have no nearest
equivalent between flip closed and flip opened.
The desktop can be divided into three graphical areas:
• Program tabs: Represent the six program or
application groups. It is located in the upper section of
the screen.
• Title bar: Indicates the active program. It is located
directly under the tab.
• Program icons: Start the different functions available
within each program tab. These are located in the lower
section of the screen. Each Program tab only contains
the Program icons relating to that specific program.
Selection Guidelines
This is a general guideline about how to work with flip open
tasks.
To select a specific function:
1. Remove the stylus from the holder on the battery.
2. Open the flip.
3. Tap the desired program tab on the desktop.
Call Call log Settings
Phone
Program tabs
Title bar
Program icons
To Next Page
Loading...
