Ericsson R380 - Page 55

Making and Receiving Calls 55
• Access Number: This is the access number to the calling
card server. The maximum number is 80 characters.
• Verification Code: This is card number and PIN to
which the call is charged to. This is dependant on the
calling card.The maximum length is 20 characters.
• Send Order: This is the order in which the phone
number you are calling and the Verification Code is
dialed. The options are
Number then Code or Code then
Number
.
5. Enter the required information.
6. Tap OK.
You are asked if you want to use this calling card.
7. Do one of the following:
• Tap Yes if you want this to be the active calling card.
or
• Tap No if you do not want this to be the active calling
card.
Note: If you need to enter menu options before sending the
calling card information, you can use a <p> pause in the
Verification Code field and enter the menu option. For
instance, if after the access number is dialed you have to enter
a 1 for calls outside the country you are in, or a 2 for calls
within the country, the verification field might look like this:
1-xxxxxxxxx. (The "x" being the Verification Code.)
Selecting an active card
You can change the card that you want to use by default for
calling card calls.
Yes
No
Calling card 1
Make this card active?