Ericsson R380 - Page 84

84 Settings
To access the Settings program:
1. With the flip open, tap on the Phone tab.
The Phone desktop appears.
2. Tap the Settings icon.
The Settings list displays.
Sounds and Alerts
This settings allows you to customize how your R380 notifies
you of incoming calls. The following list describes what can be
modified in the Sounds and Alerts section.
Ring controls
• Ring Volume - Determines the volume at which the phone
rings when there is an incoming call. The settings range from
OFF to 6. Use the arrow keys to set the volume.
• Increasing ring - When On, the ring volume increases after
two ring sequences at each level, starting at the lowest level (
1)
and going up to the maximum level (
6).The settings is either
On or Off.
• Vibrating alert - If On when silent is selected and the Ring
volume is set to
Off or the R380 is in Silent mode, then the
R380 will vibrate on all incoming calls or messages
• Silent mode - All sounds can be silenced without changing
individual settings. You can set Silent mode to
On of Off.
Ring signals
This setting lets you change what melody is used to signal you of
incoming voice and data calls. There are several different
melodies to chose from including four melodies that you can
create yourself.
Minute minder
The Minute minder is an audible signal notifying of you that a
minute has passed since you connected to the active call. This is a
convenient way to be reminded of how long you have been on a
call. The options for this settings are either
On or Off.
Edit melodies
There are four melody positions that you can edit. When you
select which melody to edit a keyboard displays. The following is
a description of how the keys are used to create your melody.
Note: Some
settings are
network and
operator
dependent.