Ericsson R380 - Page 96

96 Settings
• Automatic - back light is illuminated in an event (for instance,
an alert sound, message to be acknowledged, etc.), a key
pressed, at power on or the volume slider is pressed up and
down or vice versa. The illumination is turned off after 10
seconds of inactivity or 1 minute if the volume slider was
used.
Display settings
This option allows you to configure the settings related to the
screen on your R380.
• Contrast - allows you to set the contrast of the LCD. Use the
left and right scroll arrows to select the required contrast level;
1 corresponds to the lightest contrast and 9 to the darkest.
The default level is
5.
• Screen orientation - allows you to specify the orientation of
the screen when you open the flip.
• Screen saver hand held - allows you to configure whether the
screen saver comes on when using as a hand held. If set to
Automatic, the LCD and backlight (if on) turns off after two
minutes of inactivity.
• Screen saver hands free - allows you to configure whether the
screen saver comes on when using in conjunction with
handsfree equipment. If set to
Automatic, the LCD and
backlight (if on) turns off after two minutes of inactivity.
Input settings
This options allows you to configure settings having to do with
the input methods on your R380.
• Default input method - set which input method you would like
to use as default. The options are either the on-screen
keyboards or handwriting recognition. The factory setting is
the Soft-keyboard. See “Entering Information” on page 63 for
more information on the input methods.
• Keypad lock - allows you to set whether you lock the keypad
manually or if it locks automatically after 25 seconds.
• Key sound - allows you to configure the type of sound the
keys make when you press them. There are three options:
Off,
Click, and Tone.
Note: Some
settings are
network and
operator
dependent.