166 Extras
Area information settings
Area Information is a type of text message which is sent to all
subscribers in a certain network area. The information may be a local
road report or a phone number to a local taxi.
Note: This feature may not be available on all networks.
To change the area information settings:
1.
Select
Area info
from the list displayed in the Messaging view. The
Area Info view appears in the display.
2.
To turn incoming area information messages on or off, select
Area
info enabled:
and then select
No
or
Yes
. If off (No) then no incoming
cell broadcasts are accepted.
3.
Tap to implement and save the new settings. The display
returns to the Messaging view.
Each type of Area Information message is identified by a three-digit
code. The list below shows examples of the Area information codes
that exist today.
Note: These codes are operator dependent. For information about
the area information services that you can use, please refer to the
information supplied by your network operator.
Code: AI Message Type:
000 Index
010 Newsflashes
020 Hospitals
022 Doctors
024 Pharmacies
030 Long-distance road reports
032 Local road reports
034 Taxis
040 Weather
050 District cell information
052 Network information
054 Operator services
056 Directory enquiries (national)
057 Directory enquiries (international)
058 Customer care (national)
059 Customer care (international)
OK
To Next Page
Loading...
