Flip Closed 33
Using area information
Area information is an impersonal text message that is sent
simultaneously to all subscribers in a certain cell of a network. The
information may be a local road report or a local taxi phone number,
depending on your network area and your list of predefined channels.
The information appears in the display automatically when broadcast.
To activate area information or edit your list of predefined channels,
see “Area information settings” on page 166.
Voice mail
If you subscribe to a Voice mail service, callers can leave a voice
message when you cannot answer your calls. Depending on your
network operator, you are informed that you have received a voice
message in different ways.
When a voice mail number has been configured in your R380s, you
can make a call to your voice mail service. See “Voicemail” on page
72 for more information on storing a voice mail number.
To make a call to your voice mail number:
•
Flip closed, press and hold .
or
•
Flip open, tap and hold
A call is initiated to your voice mail number. If no voice mail
number is stored, a ‘No voicemail number stored’ message
appears in the display.
Note: This service depends on your subscription and network
operator. Further information about your Voice mail service can be
found in the operating instructions supplied by your network
operator.
To Next Page
Loading...
